ServiCover📌 Key Takeaway: A typical 640 sq ft two-car driveway costs about $3,200-$13,000. Plain concrete is $5-$8 per sq ft; decorative finishes run $8-$21+.
Cost by Finish Level
| Level | Per Sq Ft | 640 sq ft Driveway |
|---|---|---|
| Plain | $5-$8 | $3,200-$5,120 |
| Basic decorative | $8-$14 | $5,120-$8,960 |
| Mid-range | $14-$21 | $8,960-$13,440 |
Extra Costs
- Tearing out an old driveway: about $1 per sq ft
- Extra thickness or rebar for heavy vehicles
- Grading and drainage work
- Sealing: $1-$2 per sq ft professionally
Concrete vs. Asphalt
Asphalt is cheaper upfront but typically lasts 10-15 years and needs regular sealcoating. Concrete costs more but can last for decades with basic care.
🧱 Looking for a concrete contractor near you?
Check free quotes from local, pre-screened concrete contractors — 100% free, no obligation.
Get Free Quotes →Frequently Asked Questions
How thick should a driveway be?
At least 4 inches for cars; 5-6 inches for heavier vehicles like RVs or trucks.
Is a permit needed for a driveway?
Often yes, especially where the driveway meets the street. Check with your town.
🔎 How we research: The ServiCover Editorial Team compiles prices and guidance from published 2026 cost guides, manufacturer information and industry sources. Prices are national ranges and vary by location, home and provider, so always compare written quotes. We don't perform the work ourselves, and we may earn a commission when you request quotes through our partners — see our Advertiser Disclosure.